3D Lab Library
All collections

Infinite Canvas

Wall art that grows. Print four 4-inch tiles and hang them as an 8-inch square. When you want more, print the tiles next to them: every one continues the same picture across the seam, and nothing you've already printed is ever reprinted or moved.

101.6 mm tiles 3 colours a tile, plus the background 2 × 2 to 20 × 16, 18 sizes

The canvases

Pick one and grow it.

Each canvas is one continuous artwork cut into squares. The starter is always the top-left 2 × 2, and it's composed to look finished on its own.

Your own art

See your picture as a canvas.

Drop in a picture to see it cut into tiles, snapped to the filament colours a single print can carry, and growing from the starter outward. Then download the tiles as STLs to print. Flat, bold artwork works best. The picture stays in your browser.

How it works

One picture, locked in place.

The artwork lives in wall coordinates, not tile coordinates. Tile A1 is the top-left four inches of it, B1 the four inches to its right, and so on.

  1. 01

    Start

    Print A1, B1, A2 and B2. That's the starter: four tiles on one plate, an 8-inch square on the wall.

  2. 02

    Grow

    Add a row or a column whenever you like. The new tiles go on the right and the bottom, so the starter never moves.

  3. 03

    Seams line up

    Every line that leaves one tile enters the next at the same place, width and height, and each build checks it.

  4. 04

    Nothing reprints

    A tile's shape depends only on its place in the picture. Each one is fingerprinted, and a rebuild that would change a released tile stops.

On the wall

Spacers set the gap.

A spacer looks like a tic-tac-toe board, and the width of its lines is the gap between tiles: 1/4, 1/2, 3/4 or 1 inch. Put it over a tile you've hung, hang the next ones against its bars, and move on. Tiles can also hang touching, with no spacer. The spacers haven't been test-printed yet, so check the fit on one tile first.