Hexagon Collage
Bring up to ten pictures. Each one becomes its own hexagon panel, a flat cut-out in one filament colour, the same frame as our hexagon wall art. Frame each picture, approve the shape that will be printed, arrange the panels on your wall and download the models with a hanging guide. Your pictures stay in your browser.
1 · Your pictures
One picture, one hexagon.
Bold shapes work best: silhouettes, clip art, simple drawings, a high-contrast photo of a pet against a plain background. Dark becomes plastic and light becomes an opening. PNG, JPEG or WebP.
2 · Frame and approve
Panel 1
Drag the picture to move it and scroll or use the slider to zoom. The threshold decides what is dark enough to print. Photo mode suits photos; turn it off for a logo or a drawing. Smooth higher if the background still breaks into specks. Then check the final shape: marks a bridge added so a loose piece doesn't fall out, and marks detail too small to print.
3 · On the wall
Arrange the collage.
Pick a layout, then click a panel and click another place to move it there or swap the two. Each hexagon is printed on its own; the collage is how you hang them.
Download the set
The zip holds one STL per approved panel, numbered to match the hanging guide, a picture of the arrangement, the approved artwork and a project file you can open here again to carry on. Units are millimetres. The files are made in your browser from your pictures and haven't been test-printed by us, so check the sliced preview before you print.
How it works
A picture made printable.
A backed panel, the default, is the art standing 1.4 mm proud of a thin hexagon base in a second colour, so nothing can fall out and no bridges cross the picture. A cut-through panel is one flat piece in one colour: the art joined to an 8 mm rim, the background cut away. Both print flat, with no supports.
- 01
Trace
Your picture is drawn into the hexagon at 0.25 mm a pixel and smoothed. In photo mode each spot is compared with the 12 mm around it, so a face keeps its features against a busy background. Everything darker than the threshold becomes plastic, and specks too small to read are removed.
- 02
Strengthen
Openings under 1 mm are closed and solid strokes under 1.2 mm are removed, so nothing is thinner than three nozzle lines.
- 03
Hold
Specks under 4 mm² are dropped. On a backed panel the base holds every other piece. On a cut-through panel each loose piece is tied to the nearest plastic with a 1.6 mm bridge, so nothing falls out.
- 04
Check
The final shape must be one piece. You see it before you approve it, and the download is exactly what you approved.